Ihre Kunden erwarten von Ihnen als AV-Profi erstklassige Lösungen bis ins
Detail: die speziell für AV-Installationen entwickelten Rackkomponenten von
Middle Atlantic erleichtern Ihnen die Entwicklung eines Systems, das durch
Zuverlässigkeit, lange Lebensdauer und sauberen Geräteeinbau überzeugt.
Passives oder aktives Thermomanagement hilft Ihnen bei der optimalen
Auslastung Ihrer Racks - keine "verschenkten" Höheneinheiten mehr
Durch richtig angewandtes Thermomanagement erhöht sich die
Zuverlässigkeit und Langlebigkeit des Systems und bewahrt Sie vor "bösen"
Überraschungen, wenn Geräte den sog. Hitzetod sterben.
Durchdachtes Kabelmanagement erleichtert die Wartung und Erweiterung
eines Systems und spart unter dem Strich deutlich Kosten.
Demovideo und Broschüre mit Tipps zum Thema Rackintegration
Die Broschüre
"Rackintegration - Wie man Zeit spart und es richtig
macht" bietet einen hervorragenden Einstieg ins
Thema Rackplanung; allgemeine und produktspezifische Informationen zum
Kabel- und Thermo-management mit Middle Atlantic Racks.
Thomas
Ruess von COMM-TEC erklärt in 3 ½ Min, warum 19" Racks und
Geräteschränke von Middle Atlantic Products die bessere Wahl für
AV-Installationen sind. Link
zum Video
Workshop (1,5h) als Webcast - oder bei Ihnen vor
Ort
Ein ausführliches Schulungsvideo (Mediasite Webcast, Präsentation mit
Video, Dauer:1,5h) finden Sie hier: Link
Schulungsvideo
Wir kommen zu Ihnen und schulen Sie und Ihre Kollegen, das Wissen ist
universell einsetzbar. Dauer: 1,5h.
The specialty AV web portal for manufacturers, system integrators,
dealers, consultants and end users
At
present there are approximately 175 potential customers for your AV services
within a range of 100 kilometers of your office. Do you know them? Do
they know you? These are your future customers!
Nowadays, end users and other prospective customers utilize almost
exclusively the internet as their search tool to find a service provider for
their project. This trend will continue well into the foreseeable
future. Professional AV businesses who actively engage in online sales and
marketing will be the ones to survive and exceed well into the
future. Those who don’t will find it difficult, if not impossible, to
continue to exist.
Your web site alone is not sufficient for this!
Online marketing professionals from the AV business have created an
independent and neutral B2B web portal for the professional AV community called
avipool. COMM-TEC is supporting this portal because
we see it as a necessary and invaluable tool for our business
community.
avipool is already online with up-to-date AV News from our
industry and a lot more additional content. Have a look! www.avipool.com
How can you take part in this unique opportunity? Why join
now?
avipool is free for endusers.
Introductory subscription price for dealers and system
integrators.
You will receive ample space on the avipool portal for your company’s
profile, reference projects, products, and of course an overview of your core
compentencies in the AV business. This will allow end users searching for
a solution to find you easier. Furthermore, you will receive periodic
reports from avipool on the statistics and characteristics of your portfolio on
the portal.
Special offer: Try avipool now for four weeks for
free! Simply write us an email indicating that you would
like to join Avipool as a subscriber for the free 4-week trial period.
Let us know if you would like to be a part of this exciting new portal which
is guaranteed to be THE future of new business generation for the professional
AV Business! The earlier you join, the quicker your company’s profile will
rise to the top of the search ranking results.
„E-Learning“ has been a buzzword in the Education market for quite some time
now. Society, politics, and institutions of higher learning have all been
engaged in conversation about „E-Learning“ and what this means to the education
process. Essentially, „E-Learning“ is about taking advantage of modern day
technology (the „E“ part of the term) to upgrade and update our learning
processes.
Great Potential in the
E-Learning market segment! AV-Expertise is in
demand!
Our support package for
you:
The best solution on the E-Learning market
On-site presentations together with you at your local prospective
customer
Sales know-how and experienced argumentation
Demonstration equipment
Support in project handling (planning, installation, configuration,
after-sales support)
„E-Learning“ is not a temporary fashion, but a lucrative
market with high growth potential! Institutions of higher
education are desperately looking for professional solutions and for companies
which can provide them! You are their local solutions-provider; we are your
support and source for the solutions! Together we can provide these solutions
and benefit mutually from this market opportunity!
Over the past few years we have, together with our dealer partners, completed
some very interesting and very lucrative projects in the E-Learning field! In
all these projects we have stood by and supported our dealer partners and system
integrators from the first presentation to the final step of the installation
and solution implementation
You too can take advantage of our support and special know-how to
realize profitable projects in the E-Learning field! You have the best
access to institutions of higher learning in your countries and AV-expertise; we
have the IT-knowledge, presentations, and demo equipment for the Mediasite
E-Learning solutions!
■ Application Examples of Mediasite projects realized by our
system integrator partners
Otto-von-Guericke University Medical School, Magdeburg,
Germany The Magdeburg University Hospital records valuable
lectures and events, and provides them online to their students to
view on-demand.
Philipps-University Marburg, Germany The University
streams special events live, so that interested viewers everywhere can
follow the event live from any location! Additionally, the
University places the recorded events and other lectures online for
on-demand access.
Higher Brightness levels and greater viewing
angles
Front projection in high-light environments is a challenge which
can only be mastered by using high-end screen material which does not reflect
ambient light. There is a demand for such solutions, as interior
designers, architects and builders alike all prefer to have their presentation
rooms flooded with plenty of light, not darkened. Dnp has come to the
rescue with a great solution for such applications, the new 23-23 screen
material for their award-winning Supernova!
The new material has been
developed in response to customer requests for a higher-gain screen for use with
smaller projectors. By addressing the limitations of existing screen materials,
such as hot-spotting, shimmering surface or too narrow viewing cone, the
Supernova 23-23 material gives a high quality viewing experience when combined
with a smaller projector, thus reducing the total cost of the installation.
Thanks to an advanced ‘second generation’ reflector, the new material also
offers more uniform brightness, and a 35% improvement in horizontal viewing
angles (compared with its predecessor the Supernova 20-20-screen material ).
These extraordinary qualities make it the ideal screen material for environments
with wide viewing angles such as Conference Rooms, Point of Sales (POS) and
Points of Information (POI) applications.
■ Main advantages of the 23-23 high gain
material
Same price, better performance
More uniform brightness
35% improvement in horizontal viewing angles
Uniform picture quality, and ultra-high contrast
Ambient light is absorbed and does not effect picture quality
■ Which dnp products are available with the new 23-23
material?
Supernova One: For more information on this screen
click here:
Supernova Core: For more information on this screen
click here:
■ Questions or support issues?
Our dnp expert Michael Sänger is ready to answer your questions and
advise you on your screens project:
Global
Caché’s IP-Bus devices have become well-established as a key component in
many control system solutions for audio-visual applications and in building
automation systems.
Small, economically priced, multi-purpose and deployable in
any manufacturer’s control system – these are only some of the
convincing arguments for Global Caché.
Global Caché’s existing offerings of multi-functional IP-Bus
devices have always come with standard interfaces for RS-232, Infrared and relay
contacts in one common housing, which were ideal for most applications. The new
iTach line offers numerous different models which have only one interface type
each, giving you more choice, flexibility, and economy. Versions are available
with either three IR outputs, three relays or one RS-232 interface. On the input
side, all three models are available as LAN, WLAN or PoE (Power over Ethernet).
Hence, there are no limitations regarding the integration options in networked
control system solutions. And thanks to the integrated web server, configuring
of the devices is very easy.
iTach
Bus devices are manufacturer-independent and can of course be used in AVIT
Control installations, but also together with AMX*, Crestron* or CUE*.
A special highlight of these small boxes is the incredibly easy connection to
iPhone*/iPod touch (see drawing) enabling you to save even more money when
planning and executing your control system solution!
For more information on the Global Caché product line, including iTach,
please click here
* The mentioned brands are proprietary of the respective
owner
The ProFLECT II, the new generation of our successful ProFLECT, is
essentially the solution to your ceiling-mount projector problems. This
innovative product allows you to install your video projector in between the
finished, lower ceiling and the raw, upper ceiling, out of sight until needed.
The professional dual mirror system delivers perfect images when in use, and
serves to hide the projector when not in use.
When not in use the projector is completely out of sight, not disturbing
the room design and protected against damage, dirt and dust, and theft.
The projector remains in the ceiling while in use, dramatically reducing
the noise level of the cooling fan, allowing your clients to focus on the
presentation and not be distracted by the projector's motor!
In the closed position the bottom side of the mirror can be customized to
carry the same ceiling design as the rest of the room, regardless of whether
it is wood paneling, wallpaper, stucco work or just paint!
The projector can be easily removed for servicing or replacement while in
the "open" position.
Accepts most projectors up to a maximum size of 540 mm width and 200 mm
height.
Low installation depth of only 275 mm
Integrated relay allows for direct control from any control system
Easy installation and trouble-free access to the projector for future
servicing
■ How can I get more information about the ProFLECT
II
Click Here to download a data sheet for the
ProFLECT II, including all necessary technical specifications and points to keep
in mind when selecting a projector for the ProFLECT II.
Click
Herefor a glossy brochure on the ProFLECT II.
Thomas Ruess is our product manager for the ProFLECT II, he
stands ready to take your calls or emails if you have any questions or require
additional information on the ProFLECT II: truess@comm-tec.de
Phone +49 7161 3000-770
Switching and distributing video and audio signals in a standard conference
room can be so easy if you have the right equipment. COMM-TEC’s new
UP-1080p takes over the complete signal management and signal
processing in the room, and comes in at a price point which is sure to draw your
attention!
■
Features at a glance
12 inputs (FBAS, S-Video, YUV, RGBHV/VGA, HDMI)
Integrated scaler scales all input signals to the optimal output
resolution up to 1080p
2 outputs for simultaneous analog and digital video with sound (e.g. for
local reference monitor)
Only one cable necessary to the display/projector, making your
installation and setup quick and easy!
HDCP-compliant Microphone input signal can be mixed to the audio output
COMM-TEC first introduced its now legendary ProTUNE back in 2001 to a storm
of applause and a flood of orders from professional systems integrators who
required a professional TV and Radio tuner in their installations which offered
bi-directional communication to interact with the control system in the project.
Dissatisfied with using cheap, one-way IR solutions like VCRs, the ProTUNE was
truly a unique, value-adding product which helped their businesses.
Now, nearly a decade and 5 product-generations later, COMM-TEC is very proud
to announce the availability of the next generation in the ProTUNE family, the
ProTUNE HD! Offering the same great bi-directional
control features that made the ProTUNE famous, the ProTUNE HD is of course ready
for digital broadcast reception, outputs true High Definition resolution (720p /
1080i), and is available for Satellite or Cable TV reception!
Main Features at a glance:
Full featured bi-directional control via RS-232 and Ethernet ports
Receives digital TV and radio signals
4:3 and 16:9 aspect ratios
Outputs resolutions up to 720p / 1080i
Professional video outputs: HDMI, YUV-HD, S-Video
Balanced and unbalanced stereo outputs
Common interface slot for PAY-TV cards
Available for Satellite or for Cable reception
Robust 19" rack housing
Designed for continuous operation
Drivers for AVIT / Stardraw Control, AMX and Crestron included in
delivery!
The transmission and distribution of top-quality HDMI signals is fraught with
challenges and difficulties: limited distances, sub-optimal resolutions
and major headaches with HDCP (High-bandwidth Digital Content
Protection) and EDID (Extended Display Identification Data) are
just some of the main issues causing trouble in HDMI signal management.
COMM-TEC is very proud to announce a new product which solves many of these
problems: ProNET is a system which allows for
point-to-point, point-to-multipoint and multipoint-to-multipoint
configurations for transmitting and managing HDMI signals over
standard IP networks!
Key Features at a glance
Transmits full HD resolution signals to 1920 x 1080
Point-to-Point, Point-to-Multipoint, and Multipoint-to-Multipoint
configurations possible
No distance limitations
Up to 25 transmitters and 200 receivers possible in a single system
Utilizes standard network switches for matrix switching functionality
Each receiver automatically outputs the optimal resolution of the display
it is connected to, regardless of the resolution it receives
Completely HDCP and EDID compatible
Transmitter is also available as a 19“ rack mount unit (with 3
transmitter units built-in)
Significantly less expensive than standard HDMI transmission technology
How
can I get more Informations on the ProNET?
Click below to see a webcast of our Product Manager Uwe Röddinger
explain the details of the
system. (PLEASE NOTE: Your browser must
support Silverlight to view this
presentation): >Link
Webcast
Click
here for a .pdf which gives a good overview of the technical
details.
Brand new cost-effective HD visual presenter by Samsung – upgrade to
quality education
The SDP-860 has been designed ‒ and priced! ‒ especially with the education
sector in mind, a market with ever increasing importance for the visual
presenter business. This economical, high-performance presenter enhances
classroom experience with impressive image quality, unparalleled video output,
rugged design and clever features. This model is also ideal for example as an
entry level solution for small conference rooms!
COMM-TEC has tested this unit in a direct shoot out against comparable models
available from the competition - and found that the SDP-860 is the best
presenter in this price range currently available on the market!
Crystal clear, noise free images even in low light environments, achieved
by Samsung’s proprietary ISP Chip and 2D/3D Noise reduction technology
Unparalleled Video output with True SXGA at 30fps, supports DVI and wide
screen display (16:9) in full HD resolution
Intuitive handling
High quality rugged design for the everyday use in challenging school
environments
Multiple joint camera head can record images from the room, e.g. black
boards, students
Storage capacity for pictures and video
48 x combined zoom shows smallest details
Built-in microphone for synchronous recording of video and sound
Microscope adapter available
For detailed information, please follow this link to the
SDP-860 data sheet.
Central knowledge database for control and signal management
questions
At COMM-TEC we understand quite well that you are dealing with complex
technical products in your daily business, and we know that it is crucial for
you to get a fast response to your questions and find quick solutions for your
problems. Competent technical support at COMM-TEC is a service that goes without
saying for us.
In
addition to our telephone support, COMM-TEC is now excited to announce the start
of our online support portal! This portal has been designed to offer you
comprehensive help and support for many of your technical and programming
questions. Among other features, you will find in our COMM-TEC support
forum:
A knowledge database for control and
signal management questions
A cleverly thought-out search function which will quickly lead you to
the correct answers to your questions
Solutions to your problems 24/7, even on weekends and outside of office
hours
Sample codes and scripts which save you programming time
Competent moderators from our COMM-TEC support team
The chance to discuss solutions with other users
Register for free under http://forum.comm-tec.de After a short period of time your account will be activated by our
moderators and you can profit from the knowledge of our support team and of your
peers.
As we all have no doubt experienced at one time or another, small conference-
and seminar room installations usually do not have the budget to afford a
control system in the solution. This can be frustrating both for you,
the integrator, and for the end user, as the final result of the
installation will be sub-optimal without a professional control system
keeping charge of the room.
These frustrating days are now over!!
COMM-TEC is very pleased to announce our AVIT basic control system package
for less than € 1.000 List Price!!
AVIT basic ‒ Main features at a glance
Complete professional control system solution with 7" table top
touch panel, master controller, three IR and one RS-232 control port,
Stardraw stand-alone project license.
System is bi-directional, allowing for display of status feedback to
the touch panel
Touch Panel requires only one USB connection for both data and
power!
System can be easily expanded for your customer's future
requirements
Easily integrate your iPhone*, iPod Touch, PDA, Smartphone, etc., as
an additional user interface for the system.
Package List Price: € 989,00 ex
VAT
AVIT
complete control system: Touchpanel + Controller +
Bus Device + Stardraw-Stand-alone-project
license
Why use AVIT?
AVIT is the future of control system technology! No
other control system integrates so easily and completely into standard IT
technology infrastructures than AVIT!
Utilizing IT Standards makes your life much easier when integrating the
control system into your customer's building and network infrastructure
Your customer's IT personell support you completely - they understand
you completely and know what you are talking about!!
Our extremely attractive price allows you to enter into markets and get
business where budgetary restrictions would have prevented you from
selling other, higher-priced control systems.
Your customers are satisfied in knowing they have purchased a control
system which is based on technology for the future, thus their investment
is secure!
Want to learn more about AVIT?
Please have a look at our AVIT
web portal for comprehensive information on the product line, including
technical specifications, pictures, data sheets, training videos, and a whole
lot more!
Retrofit
easily, no major construction work necessary
The visualized control of home automation processes like lighting, shades,
jalousie, heating, air-conditioning, security, etc., via a central touch panel
is an important part of any complete control concept in the home or conference
room. However, the physical connections of these components and systems is
usually an enormous undertaking which requires a large budget and a lot of
work.
COMM-TEC's addition to the AVIT portfolio of HomeMatic
products provides an easy, inexpensive solution to this challenge!
HomeMatic offers professional, inexpensive solutions for integration in the
COMM-TEC AVIT control system for wirelessly controlling your home.
■ Featuresat a glance
Easily integrates control of lights, blinds, jalousie, projection screen,
etc.
Retrofit your home or conference room with no major construction work on
the walls or structure of the house or building
Bi-directional, wireless communication
All components fit into standard European switch housings and electric
cabinets
Cost-Effective Digital Signage complete solution packages!
Digital Media Players with Software starting at € 290 List Price!
COMM-TEC is very pleased to announce the latest addition to our family of
products we are distributing: the Roku brand of BrightSign digital signage
solutions!
BrightSign products are reliable non-PC, solid-state digital sign and kiosk
controllers perfect for driving any stand-alone or networked display.
BrightSign delivers high-definition video, images and audio with superior
quality and simplicity and now offers new compact-sized models to choose
from.
Media playback is automatic from removable flash memory cards, and
interactive features include support for touch screens, buttons, mice and more.
BrightSign also supports networking for remote content delivery, scheduling,
synchronization of multiple displays, and zones for displaying multiple
impressions on a single screen.
With BrightSign, quality and reliability are delivered in a simple all-in-one
solution without complicated PCs, making it ideal for any digital signage
application.
There are five different, complete packages to choose from, with a solution
available to fit the features requested and budget authorized for most all small
to mid-sized applications.
The BrightSign solution consists of a player and the
Authoring-Software.
■ Featuresat a glance
Multi-zone-Display: Displays multiple zones of
information on one screen (Clock, Video, Scrolling text, Graphics, etc.
See application example picture to the right.)
Ticker for scrolling text or RSS Feed
Failsafe: no PC-Hardware
Easy to control: Inputs for Touchscreen, Trackball,
contacts, RS-232, IP
From 290,00 Euro list price (includes Authoring-Software)
■ Links and more information
You can get a quick overview of the various models, functions and prices from
the attached product data sheet. Additionally, you can follow this link to
our website for more information on the Roku BrightSign players:
Following its initial preview at the recent InfoComm 2009, Stardraw.com has
announced the official release of its latest system control application,
Stardraw Control 2010. Control 2010 is a significant step up from the previous
2007 version, offering users greater flexibility, even sexier User Interfaces
(UIs) and the ability to exploit the ever-increasing processing power of modern
hardware.
Control 2010 is fully compatible with 2007 meaning that all current projects
can easily be transferred to the new platform and benefit from its improved
features and capabilities.
Stardraw 2010 is now based on the .Net Framework 3.5, which is a quantum leap
in technology sure to benefit everyone who uses AVIT Control
for their room- and facility control. Main improvements at a glance:
Easier to program than ever before: Integrates with
Visual Studio 2008 (including Express edition, which is free). Visual Studio
is the professional software development environment and developers can now
write drivers in the .NET language of their choice, including C# 3.0, and
debug their control programs using VS2008.
Allows for use of mobile telephones, PDA’s and smartphones as user
control interfaces: Supports web services.
New Feature – event logging: Deployed projects write
all events to a self-contained log file (.txt file) during use so that the
installer can review any and all events over any time frame to analyze and
diagnose system activity remotely.
Greatly enhanced performance: Native support of 32-bit
and 64-bit operating systems and use of multi-core processors. Compatible
with Windows XP, Vista and Windows 7
Completely record presentations, training sessions and
lectures and then publish them in minutes on the web - Mediasite sets standards
for Rich Media E-Learning Systems. Presentations are now able to be
completely recorded and made accessible to audiences in no time at all and with
little effort (lecture with vision and sound, PowerPoint, text, graphic, etc.) .
Any standard Web browser is adequate to playback the webcast. For
institutions of education or companies with extensive training, Mediasite is the
ideal solution.
Version 5.0 comes completely revised with countless
new features.
■ New Features
Pause-function and Audio-gauge-warning while recording capabilities
Cutting / editing functions are extended and improved
Completely revised Mediasite Player/Viewer
More flexibility in organization, display and control of the
webcast-catalogues
Latest information for the user via RSS-Feeds and
Podcasts
User interface freely configurable, fullscreen
display
the iPhone/iPod touch triggered off a hype all over the world. Our australian
partner company CommandFusion was one of the first on the market who developed
software solutions to use the iPhone as a Touch Panel.
AVIT Control
works with the CommandFusion solution without any modifications due to its
open system structure.
Proprietary systems
like AMX* or Crestron* need special drivers to allow the CommandFusion
solution to work.
■Main Features of
CommandFusion
Full functionality of a professional Touch Panel
Bidirectional when employed in a media control system
Free user interface design
Page flipping is possible by turning the iPhone
Fullscreen display without iPhone infobar
Unlimited number of operating pages, unlimited number of iPhones in one
system
Easy programming
Ideal extension to Wallmount Touch Panels
Works also with iPod touch
Required software application iViewer available for only 136,00 € (list
price, ex.VAT) Quantity pricing and dealer net prices see below
■Demo Video
A demo video vividly shows how you can control light with an
iPhone: Link to
Video
■Standalone "starter package"
Includes CommandFusion Software (iViewer license for iPhone /
iPod touch), IP-Bus Device (Global Caché GC100/6 - 1 x RS-232, 3 x IR, IP). Not
included: iPhone/iPod touch, access point.
■Links and more information
CommandFusion has made the drivers for AMX* and Crestron* available for
download on its website. The license for the iViewer software application
can be ordered from COMM-TEC.
The attached iPhone installation guide
describes what you need to use an iPhone or iPod touch as an AVIT Touch
Panel.
COMM-TEC’s successful AVIT control system, using Stardraw
Control software, not only offers you the most cost-effective, feature-rich
control system on the market today, but is also a tool for you to guide your
company through this difficult business environment! Today I want to point out
to you two areas in which our AVIT Control System can play a major role in
saving your business:
■ Exchange Rate Fluctuations & Budget Cuts
Exchange Rate Fluctuations For most of you living in
countries in Eastern Europe, and in other areas of Europe not using the Euro,
you are dealing with your customers in your native currency. You make bids
on jobs in your native currency, but your suppliers usually are demanding Euros
or Dollars. This can create very big problems for you if your currency
loses significant value between the time you made the offer to the customer, and
the time the customer actually orders from you and you order from your
supplier. In some cases, the difference in exchange rates has fluctuated so
greatly that your entire profit on that job has been lost even before you
started the job. Budget Cuts Regardless of the currency we are using, the
drop in business brought on by the world’s financial crisis has no doubt
effected all of us. The € 50.000 AV project you had been waiting for has
suddenly been cut down to the bare essentials, and the budget has been sliced to
€ 25.000. Typically, the first thing to get cut out is the control system,
because normally the very expensive control system coming from the „established“
manufacturers is such a large portion of the total AV budget that it is the
easiest to cut.
In both cases, COMM-TEC’s AVIT control system can help!!
Exchange Rate Fluctuations
The AVIT control system costs a fraction of what the „established“ control
systems cost, is quicker and less costly to program, uses established
international TCP/IP standards, requires no expensive proprietary hardware or
programming knowledge, and offers much the same power and functionality as any
major control system player on the market. So, if you have already made an
offer for a control system months ago when the exchange rate was more favorable
to your local currency, and now are forced to sell this control system to the
end user at a time when the exchange rate would destroy all of your profits,
AVIT is here to help!!
Budget Cuts
Unfortunately we cannot change the economic environment we all find ourselves
in at the moment, BUT we can offer you a much more cost-effective, full-featured
Control System which can do everything that the other control systems can do, at
a fraction of the price. This may help you to salvage some of the business
which normally would have been cut due to budgetary
requirements. Additionally, selling the AVIT control system into new
projects will be much easier, as it’s significantly lower price allows you to
beat the competition every time! For complete information on COMM-TEC’s AVIT
Control System, click here: http://www.comm-tec.de/englisch/avit.html If you would like more detailed information on our AVIT Control System, or
would like to have a visit from one of our sales force to demonstrate the
system, please do not hesitate to get in touch with us
anytime!
Control concepts in the conference room or in the private home often involve
the operation of home automation as well as that of lights, blinds and
heating/air condition. The physical connection of these components and systems
is usually carried out in an existing electrical cabinet.
The ProSWITCH Bus Device is designed to simplify this connection
process. It attaches on the mounting rail like an automatic circuit breaker
saving you the circumstantial cabling from the 19" rack to the electrical
cabinet. This device allows for a single network cable to be
sufficient.
Product features at a glance
Easy click-mounting on standardized mounting rails
Control over TCP/IP / standard IP-networks
Connection to the AVIT-systems with a single network cable
Available interfaces: - RS-232/422/485, e.g. for light control or
heating systems - I/O, e.g. for window and door contacts - 0–10 Volt,
e.g. to dim all established illuminators - Relays e.g. for blinds or
ventilation flaps
Power supply of the Bus Devices is possible over Standard 24 V mounting
rail
Available interfaces: RS-232/422/485, I/O, 0 – 10 Volt, relays (230 V)
Brightly lit rooms and front projection:
two demands which seem incompatible. It is often the case with high-end
board- and conference rooms, that for aesthetic reasons the room is flooded by
natural light with little or no possibility to darken the room for front
projection. Rear projection is often not possible for reasons of
space. What is an integrator to do?
The dnp Supernova screen provides the answer! The Supernova has a special,
patented optical projection surface which absorbs ambient light and only
reflects light coming from the projector. The result is very impressive, even
with bright sunlight flooding through the windows. The Supernova Flex balances
supreme black levels with an ergonomic brightness level. This prevents eye
strain and provides clear and vivid images with full color saturation,
regardless of the angle in which the viewer is positioned.
The motor-driven Supernova Flex is now available as a ceiling mounted model
and as a wall-mount.
■Special Features at
a glance
Brilliant projection even in brightly lit rooms
Superior uniformity. No bright spots or dark corners
Quickly and easily retractable
Easy to install, easy to maintain due to quick and trouble-free screen
access
Only 2 mm thick cover plate makes for elegant integration into the ceiling
Controllable via Infrared, RS-232 and contact
closure
Fabric quality, easy mounting, and price are the decisive
criteria for projection screens in standard installations. The new
WallMaster II Deluxe is the right choice every time because it meets all the
demands of a professional screen at a very competitive price.
Available in 4:3, 16:9 and square formats up to 120“ diagonal, COMM-TEC’s new
WallMaster II Deluxe boasts a first-class fabric, a
revolutionary click-mounting system, and the renowned CSR-System (Controlled
Screen Return). The CSR system ensures the quiet controlled return of the screen
into the case, providing optimal performance, smooth, consistent operation, and
longer product life. The screen surface locks in at any position of your choice
and can thus be adapted to different applications.
Product features at a glance
Beautifully smooth and even first-class Matte White fabric with
black border and black rear surface
All screens come standard with black border and black rear,
optimizing full reflection of the projector‘s light
Revolutionary click mounting system allows for easy and quick
installation by one person
Small, elegant square aluminum housing
Controlled Screen Return (CSR) for longer screen life
Screen can be pulled down and fixed in any required position
Available in 4:3, 16:9 and square formats up to 120"
diagonal
Middle Atlantic Products is the leading manufacturer of
racks and enclosures, designed for commercial and residential AV installations,
Pro Sound installations and studios. Having their roots in the Pro Audio
industry Middle Atlantic Products exactly knows about the requirements of AV
integrators. The products therefore offer unique features for time and cost
saving as well as ease of integration features like slide out and rotate
functionality for perfect rear access during installation and service.
After an extremely successful 2 years of representing Middle Atlantic
Products in Germany, Austria, France and other major parts of Continental
Europe, Middle Atlantic Products and COMM-TEC have taken the next step in their
cooperation to include BENELUX countries in the exclusive distribution
agreement. The agreement will become effective on June 1st, 2009.
Rainer Sprinzl, COMM-TEC’s Managing Director Sales and Marketing, notes:
„Middle Atlantic Products is a manufacturer with an extremely high reputation.
Extending our exclusive distribution agreement to include the BENELUX countries
is an important component of our sales and marketing strategy. With Middle
Atlantic Products we are able to offer solutions to our BENELUX system
integrators that stand out considerably from the rest of the crowd of racks and
enclosures available on the market.“
Professional screen with Somfy motor and RS-232 interface
The projection screen is the visual centerpiece of any AV installation.
In a professionally integrated system it not only should allow for a
first-class projection but also should be easy to operate, aesthetically
pleasing to look at, and run quietly and unobtrusively.
Available in 4:3 and 16:9 formats up to 150“ diagonal, COMM-TEC’s new
Electric Master II Deluxe boasts a first-class fabric, a revolutionary
mounting system, top-of-the-line Somfy motor and virtually everything else
you need for your professional applications — all at a price that is tough
to beat.
■Main features at a glance
Very smooth and quiet Somfy-Motor
Small, elegant square bar white housing
Revolutionary click mounting system allows for easy and quick
installation by one person
Beautifully smooth and even first-class Matte White fabric with black
border and black rear surface
End switch and position regulator can be easily controlled with provided
remote control or contact inputs
Optional RS-232 interface
Optional 3-way control switch (up, down, stop) for on-wall mounting
The new software application iViewer developped by CommandFusion allows
to use an iPod Touch or an iPhone as a control panel for AVIT control systems.
The iPod / iPhone acts in a control system like a touch panel, is able to
show feedback from devices and offers full functionality of a professional
control panel. The GUI (graphical user interface) is freely configurable with
the guiDesigner software from CommandFusion, which is free of charge
CommandFusion's iViewer ist available exclusively at
COMM-TEC.
iPhone as
AVIT control panel at COMM-TEC's ISE 2009 booth in Amsterdam.
professional document cameras show their true strength in
the presentation of text. Here, the quality of the camera chip used combined
with the optics make the difference.
The HD camera which is integrated in the new Samsung model
UF-130ST has a 1/3'' progressive scan CCD-Chip which, in
interaction with the high-class optics, presents a crisp and detailed image
of your templates on a large-scale display, no matter whether you are
showing text or objects.
■Product characteristics and advantages
HD resolution with 720p (selectable resolution: 720p, SXGA, XGA)
Templates can be moved judder-free due to 30 images per second
14 x optical zoom shows even the smallest details
Bright and flexible LED lamp provides an optimum of illumination
DVI- and VGA output
USB-port for storing the images on a memory stick
Large presentation area for Din A4 templates
Selection and symbol function
Easy handling
Optional light box for films, slides or X-ray photographs
New from doremi: universal signal converter GHX-10 for
all digital video signals
doremi is familiar to you as the world's premier manufacturer of professional
digital video recorders and players. Beyond this doremi also offers
first-class signal converters that satisfy the highest demands for image quality
and flexibility. The latest product in this range is the universal signal
converter GHX-10:
■ Performance features GHX-10
Universal converter for digital video → flexible solution
for rental companies
Cross converts between all of the following signal types: DVI, HDMI, SDI,
HDSDI and Dual Link HDSDI
Resolutions up to 2K
Embedding/De-Embedding of AES-audio signals in SD/HDSDI-signal (Audiodelay
adjustable)
Control over front display, PC, IR remote control, USB.
Test picture generator onboard (fixed and moving images) for easy
configuration
Available now
List price: 3.050,00 €
The attached pdf offers an overview of the complete range of doremi signal
converters.
If you have any questions, please do not hesitate to contact
us!
Wireless transmission of HD video and PC images: Excellent image
quality with a data rate of 110 Mbit/s
Avocent‘s new MPX1550 wireless transmission system for HD video and PC
graphics offers an unprecedented image quality and easy, plug-and-play
operation. The data rate of up to 110 Mbit/s allows for less compression as is
necessary with other systems. This is directly reflected in the superb image
quality, mainly when content with a lot of details, like Excel charts or medical
pictures, have to be transmitted.
■ The advantages of the MPX 1550:
Transmits wirelessly and jitter-free HD videos up to 1080i and PC signals
up to WXGA
The perfect solution wherever it is not possible to use cables (e.g. in
large buildings) or when cabling is not possible due to budgetary reasons
One transmitter can transmit the video signal to up to eight
receivers
Interfaces for analog and digital signals (DVI / HDMI / VGA /
component)
Wireless range up to 300 m
Operation also over LAN/IP
Easy and fast start-up
Pure hardware solution, no software is necessary
List price for a complete MPX1550 system (consisting of one
transmitter and one receiver) is € 2.040
COMM-TEC takes on exclusive distribution for Weibel
Projector and Plasma Lifts
Weibel is the leading manufacturer of electric ceiling and cabinet
mounting lifts for projectors and Plasma- /LC-Displays which are installed
worldwidely in conference- / seminar rooms as well as in private houses. The
products of the renowned Swiss company are famous for their quality and
precision. Effective from May 15th, 2008 COMM-TEC takes on the exclusive
distribution for the Weibel lifts in Germany and Austria.
Herman Holtus, Managing Director of Weibel Lift AG commented the
future cooperation: "COMM-TEC is the best partner for us in the German market.
They have a very strong distribution approach in both Germany and Austria that
can help Weibel Lift AG move forward in this market. Moreover, COMM-TEC is
taking training very serious and has implemented various training classes,
something that Weibel Lift AG believes is very important."
Hans Weibel started his business after working for many years as a
systems integrator. Frustrated with the lack of quality and reliability
which traditional, scissor-type lifts had to offer, he knew he could design a
better system. Apart from the danger posed by scissor-type lifts'
mechanisms locking up, the ofttimes inexact nature of the mechanics used for
opening and closing the port are always a major source of problems, both for the
installer and the end user.
Weibel Lifts address these problems and solve them in magnificent
fashion with a unique, highly precise spindle system which never jams, is
accurate to 0.1 mm, and operates with the precision and reliability of a fine
Swiss watch! Weibel Lifts are available in three
types: Projector lifts for dropped ceiling installation; Projector
lifts for under the table, under the floor, or other furniture; and
Plasma lifts for under the table, floor or other furniture.
transmitting video signals over long distances using
conventional coax cable is possible in most cases only with considerable
effort and cost. Using CAT5 cables has become an accepted standard now for
this, with more than acceptable costs, effort and results.
The new COMM-TEC CAT5-Transmitters are a reasonable, cost-effective and
high-quality alternative:
Supported signal types:
Composite Video, YUV, digital and analog Audio
Resolution up to 1080i (component models only)
152 meters of coverage distance at highest resolution (can be extended up
to 300 meters through cascading)
Protection against electromagnetic fields at low crosstalk
No power supply necessary (applies only to the passive units)
Equalizer for adjusting brightness and definition
Table models and wall-mount models available for in-wall outlet sockets
Price from 150,- € for a pair of emitter / receiver (list price)
COMM-TEC has been providing you with high-quality,
cost-effective Signal Management products for many years now. A recent review of
customer feedback on these products has shown us that you especially appreciate
our products' low pricing, high level of quality and dependability, ease of
installation and operation, and the fact that all our products ship immediately
ex-stock from our central warehouse here in Germany.
This excellent
feedback has motivated us to find even more ways to serve you better with our
Signal Management products! To that end we are very proud to announce the start
of our new Signal Management Quality and Service offensive:
5 year guarantee! This is just a small step for us to
show you that we stand behind the long-term quality and dependability of
our products!
Advanced swap-out exchange for defective units still under
warranty! In the unlikely event that something does go wrong with
our unit, we want to make your life, and that of your customer, as easy as
possible by sending you an advance replacement unit. This saves you and your
customer time, money, and unnecessary trips to the installation
site!
The products
covered under this new Quality and Service offensive
are:
COMM-TEC MTX Matrix Switchers (applies to configurations up to 16x16)
COMM-TEC UP-1280 SU Upconverter/Scaler
COMM-TEC ProCONNECT Tabletop Interconnect boxes
COMM-TEC Baluns CAT5 - AV Transmitters
Why COMM-TEC Signal
Management?
Professional quality
Competent technical support
Excellent price/performance ratio
All products available for immediate delivery from our stock in Uhingen
The ElectricMaster II offers exceptional features at exceptional
prices. Our new screen is available in 4:3 up to 120", in 16:9 up to 150"
and in square formats.
very quiet Synchro-Motor
slim housing
IR remote control included in delivery
integrated IR-receiver, additional external IR-receiver included in
delivery
limit switch to adjust the screen position
high-quality Matte White fabric with black border and black rearside
After an extremely successfull 2 years of representing DNP screens in
Germany and Austria, COMM-TEC is now very proud to announce that, effective
immediately, we have also been appointed as exclusive distribution partner for
Eastern Europe.
Every installation is different, but most of them have one
thing in common: the need for a high-contrast display.
A good
projection screen can dramatically enhance the image quality of the projector.
A cheap screen can ruin your image and become a very expensive "cost-saver".
This is why most professional installations use optical rear or front
projection screens from DNP. dnp Denmark offers the world’s most complete
range of high-contrast screens for conference rooms, training rooms, home
cinemas, and virtually every other projection application. With a DNP screen
there is no need to darken the room as the screen is virtually unaffected by
ambient light, providing the industry’s best contrast ratios, most brilliant
colors and a brightness which allows projection even in the most difficult of
lighting environments.
AVIT Control – New Touch Controllers CTouch complete
the product range
Uhingen, June 2008. AVIT Control, the new
IP-based control platform based on TCP/IP for media and building control, is
gaining profile: in addition to wall-mount touch panels, tabletop models and
portable units in different sizes are available now.
COMM-TEC covers most applications now with this extension of the
product range at very attractive prices for high functionality and
appealing design. The AVIT platform allows for the use of user interfaces
of other manufacturers (e.g. Tablet-PCs or Touch Panels), the system
integrator, however, only gets a functionality and integration guaranty
for the AVIT application with COMM-TEC products.
CTouch Wall: Touch Controllers for wall-mount
Three design series in all common display sizes from 6,5“ up
to 19“ with aluminium or plexiglass faceplates in different colours
complete the product range now. List price from 1.925,00 Euro (excluding
VAT)
CTouch Table: Tabletop Touch Controllers For the
tabletop models, too, different display sizes from 12“ up to 19“ are
available. The units have a sturdy metal stand and the display can
continuously be tilted. List price from 1.998,00 Euro (excluding VAT)
CTouch Mobile: Wireless Touch Panels (Wireless LAN) Wireless LAN Touch Panels are available in the sizes 8,4“ and 12“ in
silver and black. Both models are supplied with a docking station. List
price from 2.800,00 Euro (excluding VAT)
With immediate effect, COMM-TEC is the exclusive
distributor for doremi products in large parts of Europe
doremi is one of the leading manufacturers of digital hard disk recorders for
professional applications in the field of events, fixed installations and
broadcast. Effective immediately, company COMM-TEC, based in Uhingen near
Stuttgart, is the exclusive distributor for doremi products in Germany, Austria,
Switzerland, Italy, Scandinavia and Eastern Europe.
The doremi product range offers products for recording and playing
high-quality video. The flagship, the HD video player DSV-J2, can be found in
numerous installations world-wide, where the best video quality is required. The
DSV-J2 supports resolutions up to 4096 x 2160 (4K) and, with its two separate
SDI outputs, it can be used for example as a player for 3D projections.
Based near Stuttgart, Germany, with offices throughout Europe, COMM-TEC is
the leading pro-AV distribution organization in Europe with a comprehensive
portfolio of brands including Analog Way, Da-Lite, DNP, Lutron, Middle Atlantic
Products, Samsung and Stardraw, to name just a few. COMM-TEC serves all AV
market sectors from control, audio, lighting, video, presentation technology,
signal management as well as show and event control.
Patrick Zucchetta, doremi’s Director Business Development, sees great
possibilities for the new partnership between doremi and COMM-TEC. "§This is
perfect timing. COMM-TEC is ideally positioned for distributing our video
products. Its successful organization has established a great reputation. Now
there is an especially high potential as the growing demand for HD means our
video products, particularly the new ones introduced at NAB like the GHX-10 HD
cross-converter and the V1-HD-2K video server, can benefit from COMM-TEC’s
established market position."
"We are glad to have doremi on board as an established manufacturer for
professional video solutions. doremi products are an excellent addition to our
portfolio with first class reputation.", says Carsten Steinecker, Director
Business Development of COMM-TEC. "We are dedicated to always offering reliable
and powerful products to our dealer/installer base. The quality and the
performance of doremi products meet our demands and comply with our
understanding of professional products and solutions."
Integration and control on the open platform
The conventional control systems for private homes or conference
rooms are usually proprietary systems which only work with control devices (e.g.
touch panels) or bus devices (control interfaces) of the same manufacturer.
AVIT stands for open compatibility and established standards. The
user is free to choose whatever hardware from whatever supplier best fits his
needs. The only requirement is that the hardware must fulfill and comply with
established industry standards to guarantee compatibility.
The AVIT concept AVIT offers control system
solutions with software and hardware components. The concept behind AVIT
is to use TCP/IP as the communication infrastructure for the components in
the system. Existing IP-Networks at home or in commercial installations
can be used to distribute the AVIT control data. Extensive and expensive
cabling, as well as time consuming programming using proprietary
programming languages and platforms is now a relic of the past.
IP-Network Infrastructure All industry-standard
IP-Networks are qualified to be utilized as the backbone for the AVIT
control communication. Even Wireless LAN can be used to transport control
commands.
Industry Standard Hardware COMM-TEC’s AVIT
Controllers are industry PC’s for 19“ rack installation that are designed
for continuous operation in enterprise environments. However, the customer
is free to choose his own, industry-standard Windows-PC for this purpose
if desired.
Global Caché Bus Devices are control interfaces which are connected to
the PC controller via industry-standard Ethernet. Here again the customer
is free to choose any common Ethernet device that works over TCP/IP for
his solution.
COMM-TEC Touch Panels are available as tabletop or wall-mount models,
wired or wireless. Alternatively, standard Webpads and Tablet-PC´s can be
used as well.
Control Interfaces AVIT Control offers all the
common control ports you would expect from a professional control system.
You can control over two-way RS-232, infrared, low-voltage relays and
contact closure ports. COMM-TEC also offers professional interfaces for
integrating the functions of facility management bus systems, like KNX/EIB
and LON into the AVIT system.
Easy Programming per Drag & Drop Programming
is done using the established control software Stardraw, which greatly
reduces the time and effort involved in programming. Complex source code
programming and unmanageable links of symbols or objects are part of the
past. Clearly structured, visualized program sequences reduce your
programming workload dramatically! Every control application is freely and
individually programmable.
Sophisticated graphical design concept Designing
the GUI (graphical user interface) for the touch panel is one of the most
challenging parts of the control system programming process, and usually
the most time consuming. We have designed a number of pre-programmed
graphical templates for you to use, thus saving you an enormous amount of
time and effort. The templates have been created with great importance
placed on user ergonomics. Each template can be freely customized
depending upon your customer’s specific demands. If our templates are not
to your liking you can create your own using the Stardraw Control
graphical software.
Modern Technology for Cost-Effective Control System Solutions
Modern, future-oriented technology based on established, proven and
open standards allows for pricing that is considerably lower than that of other
control systems. COMM-TEC’s AVIT control system solutions will save you enormous
amounts of time and money in large projects, and can easily compete for and win
projects with a modest budget.
COMM-TEC GmbH takes on exclusive European distribution for
Stardraw.com
Design and control software developer Stardraw.com, has appointed
German communications technology distribution specialists, COMM-TEC GmbH as the
exclusive distribution channel for all Stardraw products throughout Europe,
including Eastern Europe and Turkey. The areas not covered by the agreement are
the UK, Ireland and Russia which will remain under the direct jurisdiction of
Stardraw.com. The agreement is effective from January 1st 2008.
Based near Stuttgart, Germany, with offices throughout Europe,
COMM-TEC is the leading pro-AV distribution organization in Europe with an
impressive portfolio of brands including Analog Way, Da-Lite, DNP, Lutron,
Medialon, Middle Atlantic Products and Samsung, to name but a few. They cover
all AV market sectors from audio, lighting, video, presentation technology,
signal management and show and event control right down to racks and bespoke
equipment housing.
According to Stardraw.com marketing director Rob Robinson, the
move represents an exciting step forward. “COMM-TEC is a company that
specializes in providing solutions, not just products and, having formerly
distributed AMX for more than 15 years, what they don’t know about control
systems isn’t worth knowing. We are extremely flattered that, after careful
deliberation and extensive product evaluation, COMM-TEC has concluded that
Stardraw Control is the right platform on which to provide the next generation
of control solutions.”
Robinson continued, “From our point of view, COMM-TEC has an
extremely impressive track record, a highly complementary portfolio of products
and, importantly, a vision of control systems and next-generation control
solutions that matches our own. I am fully confident that this will be not just
a distribution partnership, but an exciting and forward-thinking partnership
that will have significant consequences for the industry in years to come.”
„Stardraw is the ideal addition to the COMM-TEC product
portfolio", said Carsten Steinecker, Director Business Development of COMM-TEC.
"With Stardraw, we have an established and reliable software solution which can
be integrated on the open IP platform in control applications. We will break new
ground in control technology with Stardraw by including additional IP based
products into our portfolio in the very near future.“
Global Caché Signs Master Distributor COMM-TEC GmbH
COMM-TEC Becomes Exclusive Distribution Channel for Global
Caché Products in Germany, Austria and Eastern Europe
Amsterdam, The Netherlands, January 28, 2008 –
(Integrated Systems Europe 2008/Booth B56 Halle 2) Global Caché, a leading
provider of network connectivity products, and COMM-TEC, the leading pro A/V
distribution company in Europe, announced today that COMM-TEC has been appointed
exclusive Master Distributor for Global Caché products throughout Germany,
Austria, Albania, Belarus, Bulgaria, Croatia, Czech Republic, Estonia, Hungary,
Latvia, Lithuania, Moldova, Montenegro, Poland, Romania, Slovakia, Slovenia, and
Ukraine.
Global Caché’s GC-100 Network Adapter connects diverse devices
throughout a home and business location to a TCP/IP network where they can be
controlled, automated, and maintained by network-based software. Global Caché
offers other connectivity products, including an IR Learner, IR receiver and
sensors that can be connected to a network. Global Caché products are based on
open systems designed to work with other standards based products.
COMM-TEC is the leading distributor and manufacturer of
presentation and control products in Europe, selling solutions to professional
installers, integrators, consultants, and architects. The company represents
best of breed brands, including Avocent, Analog Way, Da-Lite, dnp Denmark,
Lutron, Kodak, Samsung Techwin, Stardraw, and Middle Atlantic Products. COMM-TEC
specializes in providing solutions, and offers comprehensive design services,
technical support, and product training.
Robin Ford, Global Caché Vice President of Business Development,
said, “We’re very pleased that after careful consideration, COMM-TEC has chosen
to represent our products in Europe. Right now, we’re seeing the convergence of
IT and AV technologies, which is causing a market shift from expensive
proprietary systems to open systems, much like corporate computing did in the
1980s. COMM-TEC’s successful 15 year history selling AMX equipment, and the fact
that they’ve recently signed to distribute Stardraw Control, which runs on open
systems, combined with the current shift in the market from proprietary to open,
all makes for an extremely successful partnership moving forward.”
Carsten Steinecker, Director of Business Development for COMM-TEC,
concurred, “The addition of Global Caché products rounds out our IP-enabling
strategy and puts us at the forefront of the move to open, more affordable
systems. This is an important direction for us and our dealer/installer customer
base, as it opens up an important new market opportunity and helps our customers
remain highly competitive. All this, while maintaining the high standard of
excellence we’ve always delivered.”
Avocent Announces Exclusive Distributor Relationship with
COMM-TEC for AV products in Germany, Austria and Switzerland
Demand Grows for Avocent’s Wired and Wireless Audiovisual and
Broadcast Products
HUNTSVILLE, Ala., Jan. 26, 2008 – Avocent
Corporation (Nasdaq: AVCT) today at the Integrated Systems Europe (ISE) trade
conference in Amsterdam announced a new exclusive distributor relationship with
COMM-TEC Vertriebsgesellschaft für Communication Techology mbH of Uhingen,
Germany. As part of the agreement, COMM-TEC will exclusively offer Avocent’s
family of Pro-A/V Emerge wired and wireless products in Germany, Austria and
Switzerland.
“We are confident that this relationship with COMM-TEC, which is
one of the leading distributors of A/V technology and products in Europe, will
give Avocent’s Emerge products greater reach,” said Joachim Rankenhohn, Avocent
senior sales executive Europe for professional AV and broadcast products
“COMM-TEC is a respected firm with a high level of expertise in the audiovisual
market and is the ideal partner to further establish Avocent’s presence in the
European A/V market.”
Avocent offers a full line of “Managed A/V Infrastructure”
solutions for professional audio/video and broadcast markets. The Avocent Emerge
family of wired and wireless products provide AV and KVM extension, switching,
distribution and signal processing. At the 2008 ISE trade show, Avocent further
expanded its Emerge product line with a high-definition (HD) multipoint
extender, which wirelessly distributes HD content from a single source to
multiple destinations and as well as new solutions to enable broadcast
professionals to convert digital and analog video to other formats (see
companion announcements).
“Avocent is an industry pioneer in IT Infrastructure products. Its
new innovative AV products are at the forefront of IT and AV convergence,” said
Rainer Sprinzl, Director Sales & Marketing at COMM-TEC. “With these
products, we will enable end users to better integrate IP and AV signals, which
has posed a significant challenge to users in the past.”
Demonstrations of Avocent’s new AV products will take place at the
Integrated Systems Europe tradeshow, Avocent booth (Hall 1, Booth #I119) in
Amsterdam, Netherlands January 29th – 31st, 2008.