COMM-TEC has been providing you with high-quality, cost-effective Signal Management products for many years now. A recent review of customer feedback on these products has shown us that you especially appreciate our products' low pricing, high level of quality and dependability, ease of installation and operation, and the fact that all our products ship immediately ex-stock from our central warehouse here in Germany.

This excellent feedback has motivated us to find even more ways to serve you better with our Signal Management products! To that end we are very proud to announce the start of our new Signal Management Quality and Service offensive:

• 5 year guarantee!
  This is just a small step for us to show you that we stand behind
  the long-term quality and dependability of our products!
  
• Advanced swap-out exchange for defective units still under warranty!
  In the unlikely event that something does go wrong with our unit, we want to make your life, and that of your customer, as easy as possible by sending you an advance replacement unit. This saves you and your customer time, money, and unnecessary trips to the installation site!
  

The products covered under this new Quality  and Service offensive are:

• COMM-TEC MTX Matrix Switchers (applies to configurations up to 16x16)
• COMM-TEC UP-1280 SU Upconverter/Scaler
• COMM-TEC ProCONNECT Tabletop Interconnect boxes
• COMM-TEC Baluns CAT5 - AV Transmitters

• Professional quality
• Competent technical support
• Excellent price/performance ratio
• All products available for immediate delivery from our stock in Uhingen

UP-1080p : The 12 to 2 Switcher and Scaler for the Conference room

The UP-1080p is an Presentationsswitcher with Scaler.
12 Input signals with 5 different signal types can be switched to the 2 parallel outputs.
All input signals will be scaled to the user defines output resolution.
The Composite, S-Video, Component and VGA Input have an balanced stereo audio input, at the HDMI inputs is the audio embedded.
An additional and controllable microphone input is available.
Video and Audio can be switched as Audio-follows-Video or Break-Away.
The switcher can be controled by front panel, IR Remote, On-Screen-Menu or by RS-232.

Features:

• Video inputs:
  - 2 x Composite
  - 2 x S-Video
  - 2 x Component
  - 2 x VGA
  - 4 x HDMI (HDCP conform)
• Audio inputs:
  - 8 x balanced stereo Audio
  - 2 x Audio via HDMI
  - 1 x Microphone (6,3 mm jack)
• Video output:
  - 1 x HDMI
  - 1 x VGA
  - parallel output by HDMI and VGA 
• Audio output:
  - Digital via HDMI, switchable
  - Analog (Stereo RCA)
• Output resolutions:
  - 4:3: 800×600, 1024×768, 1280×1024, 1600×1200
  - 16:9 / 16:10: 1280×720, 1280×800, 1366×768, 1440×900, 1600×900, 1680×1050, 1920×1080
• Control:
  - Front panel
  - IR Remote
  - On-Screen-Menu
  - RS-232
• Other:
  - HDCP conform
  - Volume control of the microphone
  - Master volume
  - Switch as Audio-follows-Video or Break-Away

____________________________________________________________________________________________________________ 

UP-1280SU Upconverter with 12 x 1 Video/Audio Switcher

Upscales video inputs (Composite, S-Video) to RGBHV Brilliant pictures and beautiful colors for perfect projection Only one single cable needed to the display / projector Ideal for LC- and Plasma Displays, as well as LCD- and DLP Projectors 3 resolutions selectable (SVGA 800 x 600, XGA 1024 x 768, SXGA 1280 x 1024) 12 Audio and Video inputs (4 x composite, 4 x S-Video, 4 x RGBHV, each with stereo audio) 3 Microphone inputs, can be mixed with the audio outputs LCD Display Front control panel for local control IR Remote control included RS-232 control port Available ex-Stock for immediate delivery

While television, DVDs, tapes and other interlaced video sources can look good on displays designed for their resolution (e.g. television sets) the results are often not satisfactory when these sources are incorrectly converted for higher resolution displays.
The embedded scalers of projectors, plasma displays or LCD screens are typically very basic and normally only optimized for computer video sources.
The UP-1280SU is ideal for displaying different types of video sources and signals on a high resolution display because all of the input signals are upconverted and output in the native resolutions required by today’s monitors, projectors, and plasma displays.
The video input signals are routed through a high-performance video processing chip, which upgrades the signal’s quality.
The same chip is also responsible for de-interlacing the signal in order to output a progressive video signal.
The result is a pure, flicker free, progressive scan video signal with no visible scan lines, greatly improved picture detail and true color reproduction.
Another great advantage of the UP-1280SU is the ease of cabling: regardless of the number of video input sources, you need only one cable from the UP-1280SU to the display.
Controlling the UP-1280SU is easy: the front control panel offers easy access to all the functions of the unit, with a feedback visible on the LCD display.
The included IR control enables users easy remote controlling of the unit.
Finally, an RS-232 control port allows for professional integration and control in a full systems solution.

Features

• Upconverter / Scaler and 12 x 1 Video/Audio Switcher in one unit
• High performance video chip produces excellent picture quality
• 3 resolutions selectable (SVGA 800 x 600, XGA 1024 x 768, SXGA 1280 x 1024)
• 4 composite (RCA) video inputs + stereo audio (RCA)
• 4 S-Video (mini DIN) inputs + stereo audio (RCA)
• 4 x RGBHV (15-pin HD) video inputs (pass through only) + stereo audio (3,5 mm jack)
• 1 x RGBHV output (15-pin HD) + stereo audio (RCA)
• 1 x RGBHV output (15-pin HD) as preview
• Stereo audio
• Front control panel
• IR remote included in delivery
• RS-232 control port

  COMM-TEC offers products around the classic Signal Management.
  These are

•   Distribution Amplifiers
•   Switcher
•   Matrix Switcher

Tabletop Interconnect Boxes

The ProCONNECT Tabletop Interconnect Boxes are made for installation in tables or furniture surfaces. With a light press on the cover, the connection plate will tilt up and show its connections. The tilting mechanism is supported by a gas-powered spring. If the connections are not needed, the box can be pushed back into the table or furniture leaving a truly even and flush surface. The 500 series has a partly fixed configuration but also includes free slots which can be equipped with additional modules.

• Easy-to-access connection panels for conference room tables
• Connections available for all prevalent signal types
• Push buttons and volume control knobs for controlling AV equipment
• All signals pass through under the table
• Modular build allows for customized solutions
• Push-to-flip mechanism saves space on the table
• Power sockets available for the most popular European standards
• No sharp edges

You will find detailed information about ProCONNECT here

Here you can find Twisted Pair extender (Balun) for
Composite, Component and Audio signals

Point-to-Multipoint as Table Top

Point-to-Point as Table Top

Point-to-Point as Flash Mount

   Cables, assembled or as bulk,
   as well as BTX, solderfree connectors,
   can you find at COMM-TEC Cable